Dreo DR-HPF017S

Smart TurboPoly Fan 517S

Device type

Fan

Standby power

0.9 W

estimated, not measured

View discovery and setup instructions for this profile.

Powercalc can discover this model automatically (by entity). Look for a discovery prompt in Home Assistant and accept it to create the sensors. About discovery

Through the interface (recommended)

Start the Powercalc config flow, choose Virtual power (library), and pick Dreo → DR-HPF017S.

Open in Home Assistant

Add this to your configuration.yaml, replacing light.my_light with your own entity.

powercalc:
  sensors:
    - entity_id: light.my_light
      manufacturer: dreo
      model: DR-HPF017S

Library sensor documentation

Community usage

No opted-in usage yet

Based on 5,406 reporting installationsOpt in to analytics

Device

Manufacturer: Dreo
Color modes: Hue and saturation
Form factor: Pedestal
Connectivity: Wi-Fi
Product page: dreo.com

Power

Rated power: 36 W claimed

Measurement

Calculation strategy: Composite
Measure device: Shelly Plug S Gen3
Measure method: Manual
Measure description: Fan: Shelly Plug S Gen3 polled every 2 s while a Home Assistant automation stepped through all 12 speeds. Oscillation: on/off delta at the same speed. RGB light (hs.csv.gz): fan at lowest speed, one light command per step, each verified in HA before reading, fan-only baseline re-measured before every saturation row and subtracted. The light only has 3 brightness levels (51/102/153). Its measured range is 0.55-5.88 W. Standby power is an estimate.
Mains voltage: 230 V
Measurements updated: Sep 13, 2026, 5:44 PM UTC

Library

Created: Sep 12, 2026, 12:00 AM UTC
Updated: Sep 13, 2026, 7:18 PM UTC
Contributors: zuranihenry
Min version: 1.25.5
Discovery: Automatic, by entity

Loading profile details…

Dreo DR-HPF017S

Smart TurboPoly Fan 517S

Set up manually instead

Through the interface (recommended)

Or configure with YAML

Device

Power

Measurement

Library

Device

Power

Measurement

Library

Smart TurboPoly Fan 517S

Set up manually instead

Through the interface .css-bxmwoh{margin:0;font-family:"Roboto","Helvetica","Arial",sans-serif;font-weight:400;font-size:0.875rem;line-height:1.43;letter-spacing:0.01071em;}(recommended)

Or configure with YAML

Or configure with YAML

Device

Power

Measurement

Library

Device

Power

Measurement

Library

Through the interface (recommended)