Bosch Smart Home Controller 1 Gen

Smart Home Controller 1 Gen.

Device type

Generic Iot

Max power

1.78 W

Insights

Used in 1.89% of installations

94 out of 4979 total installations

Learn how to opt-in

Use this profile

Powercalc can discover this model automatically (by device). Look for a discovery prompt in Home Assistant and accept it to create the sensors. About discovery

Through the interface (recommended)

Start the Powercalc config flow, choose Virtual power (library), and pick Bosch → Smart Home Controller 1 Gen.

Open in Home Assistant

Add this to your configuration.yaml, replacing light.my_light with your own entity.

powercalc:
  sensors:
    - entity_id: light.my_light
      manufacturer: bosch
      model: Smart Home Controller 1 Gen

Library sensor documentation

Device

Manufacturer: Bosch
Model ID: Smart Home Controller 1 Gen
Device type: generic_iot
Name: Smart Home Controller 1 Gen.
Description: The measured Bosch Smart Home Controller had the following devices connected: four Bosch Smart Home Radiator Thermostat II (TRV_GEN2), two Bosch Smart Home Radiator Thermostat I (TRV), and two Bosch Smart Home Door/Window Contact II (SWD2).During the 120-second measurement period, the temperature was adjusted both directly on the device itself and via the Smart Home Controller on one TRV thermostat and on one TRV_GEN2 thermostat. In addition, both window sensors were triggered twice each by opening and closing the windows.
Aliases: SHC1
SmartHomeController

Power

Max power: 1.78 W

Measurement

Calculation strategy: fixed
Measure device: TP-Link Tapo P115
Measure method: script
Measure device firmware: 1.3.4 Build 250403 Rel.150504

Library

Created: 4/9/2025, 11:41:25 PM
Updated: 8/21/2026, 12:12:06 PM
Authors: Justin Hahn
Discovery: Automatic, by device

Github

Bosch Smart Home Controller 1 Gen

Smart Home Controller 1 Gen.

Device type

Generic Iot

Max power

1.78 W

Insights

Used in 1.89% of installations

94 out of 4979 total installations

Learn how to opt-in

Use this profile

Powercalc can discover this model automatically (by device). Look for a discovery prompt in Home Assistant and accept it to create the sensors. About discovery

Through the interface (recommended)

Start the Powercalc config flow, choose Virtual power (library), and pick Bosch → Smart Home Controller 1 Gen.

Open in Home Assistant

Add this to your configuration.yaml, replacing light.my_light with your own entity.

powercalc:
  sensors:
    - entity_id: light.my_light
      manufacturer: bosch
      model: Smart Home Controller 1 Gen

Library sensor documentation

Device

Manufacturer: Bosch
Model ID: Smart Home Controller 1 Gen
Device type: generic_iot
Name: Smart Home Controller 1 Gen.
Description: The measured Bosch Smart Home Controller had the following devices connected: four Bosch Smart Home Radiator Thermostat II (TRV_GEN2), two Bosch Smart Home Radiator Thermostat I (TRV), and two Bosch Smart Home Door/Window Contact II (SWD2).During the 120-second measurement period, the temperature was adjusted both directly on the device itself and via the Smart Home Controller on one TRV thermostat and on one TRV_GEN2 thermostat. In addition, both window sensors were triggered twice each by opening and closing the windows.
Aliases: SHC1
SmartHomeController

Power

Max power: 1.78 W

Measurement

Calculation strategy: fixed
Measure device: TP-Link Tapo P115
Measure method: script
Measure device firmware: 1.3.4 Build 250403 Rel.150504

Library

Created: 4/9/2025, 11:41:25 PM
Updated: 8/21/2026, 12:12:06 PM
Authors: Justin Hahn
Discovery: Automatic, by device

Bosch Smart Home Controller 1 Gen

Smart Home Controller 1 Gen.

Generic Iot

1.78 W

Use this profile

Set up manually instead

Through the interface (recommended)

Or configure with YAML

Device

Power

Measurement

Library

Bosch Smart Home Controller 1 Gen

Smart Home Controller 1 Gen.

Generic Iot

1.78 W

Use this profile

Set up manually instead

Through the interface (recommended)

Or configure with YAML

Device

Power

Measurement

Library